-40%

Mercruiser Alpha 1 Pre Alpha Replacement Upper Unit GR 1.65/1.62 1982-1990

$ 601.91

Availability: 26 in stock
  • Condition: New
  • Brand: SEI
  • Manufacturer Part Number: 90-106-01C
  • Warranty: 3 Year
  • Replacement:: OE#: 9412A21
  • Country/Region of Manufacture: Taiwan

    Description

    Home
    Contact Us
    Shipping
    Returns
    Store categories
    Store home
    Mercruiser Sterndrives
    OMC Sterndrives
    Mercury Outboard Lower Unit
    Evinrude Johnson Lower Units
    Yamaha Outboard Lower Units
    Driveshafts
    Prop Shafts
    Shift Shafts
    Gear Sets
    Clutches
    Miscellaneous
    U-Joint and Parts
    Seals and Seal Kits
    Bearings/Bearing Assemblies
    Mercury/Mariner Rebuild Kits
    Mercrusier Rebuild Kits
    Cases
    Water Pumps & Parts
    Anodes/Trim Tabs/ Kits
    Props/Prop Kits
    Shop Manuals
    Tools
    Other
    Mercruiser Alpha 1 Pre Alpha Replacement Upper Unit 1.65 1.62 Ratio 1982-1990
    This upper unit replaces Alpha One and Pre Alpha upper units from 1982-1990. It fits 5.0 liter/ 305 ci V8 with a 2 barrel carburator. It comes with a 9-9/16" input yoke and it replaces the 1.65/ 1.62 gear ratios with a tooth count of 24/24. It is a brand new unit manufactured by SEI, and it comes with a 3 year no-fault warranty. Please see the chart below for more details on yoke lengths and how to order the correct unit.
    90-106-01C
    Shipping
    Payments
    Warranty
    Returns
    General Information
    SEI Marine Products uses FedEx Ground, FedEx 2-Day, and FedEx Priority Overnight for orders within the United States. Extra charges apply to Hawaii, Alaska, Puerto Rico, Guam and SP.
    Combine orders and save on shipping! For all Domestic and International customers, please request an invoice at check out if you are ordering multiple items. Due to different items with different weights, we ask that you request an invoice for the correct shipping total. You will receive an invoice via eBay after items are combined with the correct total.
    Multiple items may arrive in separate packages. All shipments will have a tracking number emailed to the email address that you have provided us and will be traceable through the shipping company's web site. If you have any questions regarding shipping or our policy feel free to contact the customer service department through eBay.
    Domestic Shipping
    Alaska and Hawaii customers, your items will ship out via FedEx 2-Day. Please inquire before purchasing on rates and transit times.
    **All packages shipped within the state of Florida will be charged a 7% sales tax. **
    International Shipping
    We ship items internationally via FedEx International Economy. Please request an invoice at check-out so that we can select the correct shipping amount and method. If for some reason there is a miscalculation in the shipping cost we will have to collect the money via paypal before the item(s) are shipped out.
    SEI Marine Products will not be fraudulent on any customs forms, so please do not ask. We only put the true value of the items in the box. We do not pay for any international customs fees or duties.
    We cannot issue return call tags for international customers. Please ensure you are purchasing the correct items before completing your check out . All returned items for international customers will be shipped at the customers expense. If you have purchased the wrong item and need to return you will not be refunded your original shipping money.
    If a package is returned to us for non-receipt, you will be refunded minus the shipping costs. If you would like the package resent to you, there will be another shipping charge.
    If you have any questions regarding shipping or our policy feel free to contact us via eBay.
    We proudly accept PayPal as payment for all eBay transactions.
    All items sold by SEI Marine Products will be covered under a period of one (1) year or three (3) years from the date of actual purchase. For a copy of our full warranty policy, please contact us through eBay.
    SEI Marine Products hopes that you will be happy with your new purchase and that everything meets or exceeds your expectations. This is not always the case and sometimes you get the wrong item whether it is not what you thought, or it is the wrong part for your application. SEI Marine Products will gladly accept your return within 60 days for items that are in new, sellable condition and have not been installed. Send us a note through eBay for a return authorization (RA) number and return instructions.
    General Information for Selecting and Purchasing an SEI 104/106 Upper Gearcase
    SEI sterndrives do not include new anodes / zincs. Kit part number 90-106-05K includes all anodes for a Gen 1 drive. SEI drives are compatible with OEM and other aftermarket anodes.
    All SEI drives and gearcases are covered by SEI's three year Fault Free warranty. The unit is covered for three years for breakage and damage; including failures resulting from lack of oil, fishing line, impact and other abuse.
    SEI replacement drives for Alpha I Gen I drives are available with two different input yoke lengths. Please see the image below to verify the yoke length you need.
    SEI 106 drives use the 9-9/16 length yoke. SEI 104 drives use the 8-18
    SEI offers replacement drives for both Gen I and Gen II Alpha sterndrives. The two styles are not interchangeable. Please see the images below and compare them to your existing sterndrive to determine that you are ordering the correct style replacement sterndrive.
    SE106
    SE116
    Mercruiser Model Number to Gear Ratio Chart
    Replaces most Mercruiser Sterndrives from 120 -260 HP 1967-1990.
    Your Mercruiser Sterndrive must have trim and tilt to be able to use our replacement drive.
    If your Mercruiser Sterndrive is between 1967-1969 you must verify that you have 13 splines on your upper driveshaft.
    Ships in two boxes. Comes with 9 -9/16 input yoke.
    Does not include Complete Install Kit or Anode Kit. Please see related items below.
    To determine if you have a counter rotation unit on your twin engine boat it is easiest to look at the props. If the props are identical orientation, then they are both standards. If the prop blades are opposite, then the port should be a counter rotation.
    Please refer to the model chart below to find your proper gear ratio.
    This is a live link chart, when you find your application click on the link indicated in
    red
    Model
    Year Range
    Serial Range
    Notes
    See Below
    Complete Std. Rotation
    Upper All
    Lower Std. Rotation
    Complete Counter Rotation
    Lower Counter Rotation
    120/140
    1967-1969
    2062141-2791956
    1,2,3,4,5,6
    1.94
    See #1
    See #1
    1.94 C.R.
    See #1
    120/140
    1970-1982
    2791957-6225576
    2,4,5,6
    1.94
    1.94
    Lower
    1.94 C.R
    .
    Lower C.R.
    160
    1967-1969
    2065190-2763441
    1,2,3,4,5,6
    1.62
    See #1
    See #1
    1.62 C.R.
    See #1
    165
    1970-1977
    2763442 and up
    2,4,5,6
    1.62
    1.62
    Lower
    1.62 C.R.
    Lower C.R.
    225-S
    1974
    3856268-4200499
    4,5,6
    1.47
    1.47
    Lower
    1.47 C.R.
    Lower C.R.
    233
    1975-1977
    4200500
    4,5,6
    1.47
    1.47
    Lower
    1.47 C.R.
    Lower C.R.
    250
    1977
    4791300-4898729
    4,5,6
    1.47
    1.47
    Lower
    1.47 C.R.
    Lower C.R.
    260
    1978-1982
    4898730-6225576
    4,5,6
    1.47
    1.47
    Lower
    1.47 C.R.
    Lower C.R.
    470
    1976-1982
    4208730-6225576
    2,4,5,6
    1.81
    1.81
    Lower
    1.81 C.R.
    Lower C.R.
    485
    1980-1982
    4893835 and up
    2,4,5,6
    1.81
    1.81
    Lower
    1.81 C.R.
    Lower C.R.
    888
    1971-1977
    3106717 and up
    4,5,6
    1.47
    1.47
    Lower
    1.47 C.R.
    Lower C.R.
    898/228
    1977-1982
    4782330-622576
    4,5,6
    1.47
    1.47
    Lower
    1.47 C.R.
    Lower C.R.
    R/MR/Alpha One
    1983-1990
    6225577-OD469858
    6,7
    R, MR, Alpha I- Typical Engine To Gear Ratio Chart
    To be safe, it is best to remove the top cover and count the teeth on the upper gears. This is a live link chart, when you find your application click on the link indicated in
    red
    Engine Configuration
    Horsepower
    Gear Ratio
    Tooth Count
    Complete Std. Rotation
    Upper All
    Lower Std. Rotation
    Complete
    Counter Rotation
    Lower Counter Rotation
    Inline4 Cyl. 2.5L/3.0L
    120/140
    1.98/1.94
    20/24
    1.94
    1.94
    Lower
    1.94 C.R.
    Lower C.R.
    Inline 4 Cyl. 3.7L
    170
    1.84/1.81
    17/19
    1.81
    1.81
    Lower
    1.81 C.R.
    Lower C.R.
    Inline 6 cyl
    160/165
    1.65/1.62
    24/24
    1.62
    1.62
    Lower
    1.62 C.R.
    Lower C.R.
    V6 4.3L
    185/190
    1.84/1.81
    17/19
    1.81
    1.81
    Lower
    1.81 C.R.
    Lower C.R.
    V8 305 2 Barrel Carb.
    200
    1.65/1.62
    24/24
    1.62
    1.62
    Lower
    1.62 C.R.
    Lower C.R.
    V8 305/350
    230/260
    1.50/1.47
    20/22
    1.47
    1.47
    Lower
    1.47 C.R.
    Lower C.R.
    V8 4547.4L
    330
    1.32*/1.29*
    20/16
    *We do not make this gear ratio. You could substitute a 1.47 ratio, but it would not be covered under our 3 year warranty as it is over our 300 HP Limit
    These are typical applications, it is best to confirm your ratio by counting the teeth in the upper. Although great care was taken in the creation of this guide, SEI cannot guarantee its accuracy.
    Unit has an 8 spline driveshaft on the lower unit. If your unit is original, you need to purchase a complete.
    Unit has a short yoke on the upper driveshaft. We refer to this as the Old Style
    ***Applies to all inline 4 and inline six cylinder engines up until and including 1982***
    Unit must have trim and tilt for our Replacement to work. If it has two trim hoses going to each cylinder, it has trim and tilt.
    Unit has an eyelet on top cover. Replacement unit will not.
    Unit has a round cavitation plate on lower unit. Replacement unit will not.
    Unit may have an o-ring and/or a preload pin on lower unit driveshaft. The replacement will not.
    Gear Ratio must be confirmed. Chart above is typical applications, however there is no guarantee it is correct.
    Any reference to Original Equipment Manufacturer (OEM) names, trade names, specifications, or part numbers is for informational purposes only. Sterndrive Engineering Inc. is not affiliated with any of the OEMs referred to in this ad. Copyrights and Trademarks belong to their respective companies.
    Copyright 2018 Sterndrive Engineering Inc. All Rights Reserved.
    Powered by SixBit's eCommerce Solution